Air filters are the first step to tuning any engine. The principle is simple, the more air you get in the engine, the more power you get out. Ok, so there is obviously more to it than that, but bolting on an induction kit can increase your cars power from 1-2bhp, up to 15bhp (rolling road proven!!) With modern ECU's you don't have to re-map or tune the engine, just bolt the kit on! Even a replacement element alone can add a couple of horses, and you never have to replace it, so they quickly pay for themselves. For the maximum power, you can go for a K&N typhoon kit, or an enclosed intake system like the BMC CDA kits maximising cold air intake.
Whether you are into fast road, or track / gravel racing, your car will greatly benefit from uprated suspension. Lowering springs, full suspension kit and coilovers each have their advantages and the range means that we can cater for your suspension needs whatever your budget
Performance exhausts are a great way to improve the power, and sound of your car! Even with just a sports exhaust back box, your car can sound like it means business and have a noticeable improvement in power. For the maximum power increase though, a full exhaust system is the way forward. Sports cat, or de-cat pipe (not road legal) and tubular manifold give further power gains. Free flowing exhausts get the gases out of the engine quicker, and help improve power and acceleration, especially at higher revs.
Upgrading your brakes is vital if you have increased your cars power! It is all very well accelerating like an Aston Martin, but if you stop like a shopping trolley, you are going to be in trouble. We have a large range of options for improving your brakes. Performance pads work great on standard or up rated drilled / grooved discs, improving pedal feel and reducing brake fade and glazing. For serious stopping power then a large disc upgrade or 4-6 pot callipers are the ultimate in braking systems. We have the leading brands including Bembo, Tarox, AP and Hi-Spec all at unbeatable prices.
There are a myriad of ways to tune an engine, and you can just clean it up a little with some Magnecor ignition leads, and some up rated spark plugs, or bolt on a turbo, add a ECU and boost controller, maybe a charge cooler! Whatever you need, we have it, and cheaper than the competition!
We all like a bit of luxury, and you spend a lot of time in your car, so spoil it a little. Some sports seats, leather steering wheel and colour coded leather gear knob and gaiter can make your car a much better place to be! Whether you want the quality of Momo, or the something shiney like Richbrook, DCPerformance have the lot and you wont find any of it cheaper!
Whether you are after a subtle spoiler, or a full on lairy body kit to ensure you never see another car like yours at the shows, then DCPerformance has it all.
You can dramatically update the look for your car with some new lighting. Ditch the orange indicators for some clear or crystal clear indicators, fit some shiny angel eye headlamps, and some LED or Lexus style taillights and suddenly your car stands out from the crowd! We have all the leading brands including Ultra, InPro and Auto Art all at unbeatable prices.
If you are increasing your vehicles power, then you will inevitably put more stress on the clutch and transmission, which is when you require an uprated clutch. From organic to paddle clutches, we have them all. Couple this with a quick shifts for sharp and precise gear changes and you will really be able to feel the different in your 0-60 sprints!
Don't have a ibiza? View ALL black diamond front 12 grooved brake discs
Delivery: £14.99
seat ibiza (02-09) 1.2 12v Engine size: 1198cc This is a Vented disc Diameter: 256mm Height: 37mm Bore: 65mm Studs: 5+1
Years: 2002 > Sep
Part Number: KBD874G12
seat ibiza (02-09) 1.4 16v Engine size: 1390cc This is a Vented disc Diameter: 256mm Height: 37mm Bore: 65mm Studs: 5+1
seat ibiza (02-09) 1.4 TDi Engine size: 1422cc This is a Vented disc Diameter: 256mm Height: 37mm Bore: 65mm Studs: 5+1
seat ibiza (02-09) 1.6 16v Engine size: 1598cc This is a Vented disc Diameter: 256mm Height: 37mm Bore: 65mm Studs: 5+1
Years: 2003 > Sep
seat ibiza (02-09) 1.8 Turbo 20v FR (150bhp) Engine size: 1781cc This is a Vented disc Diameter: 288mm Height: 34mm Bore: 65mm Studs: 5+1
Years: 2004 >
Part Number: KBD875G12
seat ibiza (02-09) 1.8 Turbo 20v Engine size: 1781cc This is a Vented disc Diameter: 288mm Height: 34mm Bore: 65mm Studs: 5+1
seat ibiza (02-09) 1.9 TDi (100hp) Engine size: 1896cc This is a Vented disc Diameter: 256mm Height: 37mm Bore: 65mm Studs: 5+1
seat ibiza (02-09) 1.9 TDi (130hp) Engine size: 1896cc This is a Vented disc Diameter: 288mm Height: 34mm Bore: 65mm Studs: 5+1
seat ibiza (02-09) 2.0 Engine size: 1984cc This is a Vented disc Diameter: 280mm Height: 35mm Bore: 65mm Studs: 5+1
Part Number: KBD876G12
seat ibiza (02-09) Cupra (180bhp) 1.8 Turbo 20v Engine size: 1781cc This is a Vented disc Diameter: 312mm Height: 34mm Bore: 65mm Studs: 5+5 For models with AP brakes
Years: 2004 > 2009
Part Number: KBD971G12
seat ibiza (02-09) Cupra (180bhp) 1.8 Turbo 20v Engine size: 1781cc This is a Vented disc Diameter: 312mm Height: 34mm Bore: 65mm Studs: 5+5 For models with ATE brakes
seat ibiza (02-09) Cupra (180bhp) 1.8 Turbo 20v Engine size: 1781cc This is a Vented disc Diameter: 312mm Height: 34mm Bore: 65mm Studs: 5+5 For models with Brembo brakes
Years: 2002 > 2004
seat ibiza (02-09) Cupra R 1.8 Turbo 20v Engine size: 1781cc This is a Vented disc Diameter: 312mm Height: 34mm Bore: 65mm Studs: 5+5 For models with AP brakes
Years: 2004 > Sep
seat ibiza (02-09) Cupra R 1.8 Turbo 20v Engine size: 1781cc This is a Vented disc Diameter: 312mm Height: 34mm Bore: 65mm Studs: 5+5 For models with ATE brakes
seat ibiza (02-09) Cupra R 1.9 TDi (160hp) Engine size: 1896cc This is a Vented disc Diameter: 312mm Height: 34mm Bore: 65mm Studs: 5+5 For models with AP brakes
seat ibiza (02-09) Cupra R 1.9 TDi (160hp) Engine size: 1896cc This is a Vented disc Diameter: 312mm Height: 34mm Bore: 65mm Studs: 5+5 For models with Brembo brakes
seat ibiza (021)(fura 025a)(->93) All Models (Fitted 227.5mm Disc) (Bendix PADS) Engine size: 903cc This is a Solid disc Diameter: 227.mm Height: 46mm Bore: 62mm Studs: 4+2 For models with Bendix brakes
Years: 1984 > 01/1993
Part Number: KBD165G12
seat ibiza (021)(fura 025a)(->93) All Models (Fitted 227.5mm Disc) (LUC PADS) Engine size: 903cc This is a Solid disc Diameter: 227.mm Height: 46mm Bore: 62mm Studs: 4+2 For models with Lucas brakes
seat ibiza (08 ->) 1.2 Engine size: 1198cc This is a Vented disc Diameter: 256mm Height: 37mm Bore: 65mm Studs: 5+1 For models with Lucas brakes
Years: 2008 >
seat ibiza (08 ->) 1.2 Engine size: 1198cc This is a Vented disc Diameter: 256mm Height: 37mm Bore: 65mm Studs: 5+1 For models with VW brakes
seat ibiza (08 ->) 1.2 Turbo Engine size: 1198cc This is a Vented disc Diameter: 256mm Height: 37mm Bore: 65mm Studs: 5+1 For models with Lucas brakes
Years: 2010 >
seat ibiza (08 ->) 1.2 Turbo Engine size: 1198cc This is a Vented disc Diameter: 256mm Height: 37mm Bore: 65mm Studs: 5+1 For models with VW brakes
seat ibiza (08 ->) 1.4 Engine size: 1390cc This is a Vented disc Diameter: 256mm Height: 37mm Bore: 65mm Studs: 5+1 For models with Lucas brakes
seat ibiza (08 ->) 1.4 Engine size: 1390cc This is a Vented disc Diameter: 256mm Height: 37mm Bore: 65mm Studs: 5+1 For models with VW brakes
seat ibiza (08 ->) 1.4 TD Engine size: 1422cc This is a Vented disc Diameter: 256mm Height: 37mm Bore: 65mm Studs: 5+1 For models with VW brakes
Years: 2009 >
seat ibiza (08 ->) 1.4 TD Engine size: 1422cc This is a Vented disc Diameter: 288mm Height: 34mm Bore: 65mm Studs: 5+1 For models with Lucas brakes
seat ibiza (08 ->) 1.4 TSi 140 Engine size: 1395cc This is a Vented disc Diameter: 288mm Height: 34mm Bore: 65mm Studs: 5+1
Years: 2013 >
seat ibiza (08 ->) 1.4 Turbo (150bhp) Engine size: 1390cc This is a Vented disc Diameter: 288mm Height: 34mm Bore: 65mm Studs: 5+1 For models with ATE brakes
seat ibiza (08 ->) 1.4 Turbo (180bhp) Cupra Engine size: 1390cc This is a Vented disc Diameter: 288mm Height: 34mm Bore: 65mm Studs: 5+1 For models with ATE brakes
seat ibiza (08 ->) 1.4 Turbo (180bhp) Cupra Engine size: 1390cc This is a Vented disc Diameter: 312mm Height: 34mm Bore: 65mm Studs: 5+5 For models with AP brakes
seat ibiza (08 ->) 1.6 TDi (105bhp) Engine size: 1598cc This is a Vented disc Diameter: 288mm Height: 34mm Bore: 65mm Studs: 5+1 For models with ATE brakes
seat ibiza (08 ->) 1.6 TDi (105bhp) Engine size: 1598cc This is a Vented disc Diameter: 288mm Height: 34mm Bore: 65mm Studs: 5+1 For models with VW brakes
seat ibiza (08 ->) 1.6 TDi (90bhp) Engine size: 1598cc This is a Vented disc Diameter: 256mm Height: 37mm Bore: 65mm Studs: 5+1 For models with ATE brakes
seat ibiza (08 ->) 1.6 TDi (90bhp) Engine size: 1598cc This is a Vented disc Diameter: 256mm Height: 37mm Bore: 65mm Studs: 5+1 For models with VW brakes
seat ibiza (08 ->) 1.6i 16v Engine size: 1597cc This is a Vented disc Diameter: 256mm Height: 37mm Bore: 65mm Studs: 5+1 For models with Lucas brakes
seat ibiza (08 ->) 1.6i 16v Engine size: 1597cc This is a Vented disc Diameter: 256mm Height: 37mm Bore: 65mm Studs: 5+1 For models with VW brakes
seat ibiza (08 ->) 1.8 TSI Cupra Engine size: 1798cc This is a Vented disc Diameter: 310mm Height: 34mm Bore: 65mm Studs: 5
Years: 2015 >
Part Number: KBD1981G12
seat ibiza (08 ->) 1.9 TDi (105bhp) Engine size: 1896cc This is a Vented disc Diameter: 256mm Height: 37mm Bore: 65mm Studs: 5+1 For models with VW brakes
seat ibiza (08 ->) 1.9 TDi (105bhp) Engine size: 1896cc This is a Vented disc Diameter: 288mm Height: 34mm Bore: 65mm Studs: 5+1 For models with ATE brakes
seat ibiza (08 ->) 1.9 TDi (105bhp) Engine size: 1896cc This is a Vented disc Diameter: 288mm Height: 34mm Bore: 65mm Studs: 5+1 For models with Lucas brakes
seat ibiza (08 ->) 1.9 TDi (90bhp) Engine size: 1896cc This is a Vented disc Diameter: 256mm Height: 37mm Bore: 65mm Studs: 5+1 For models with VW brakes
seat ibiza (08 ->) 1.9 TDi (90bhp) Engine size: 1896cc This is a Vented disc Diameter: 288mm Height: 34mm Bore: 65mm Studs: 5+1 For models with Lucas brakes
seat ibiza (08 ->) 2.0 TDi (141bhp) Engine size: 1968cc This is a Vented disc Diameter: 256mm Height: 37mm Bore: 65mm Studs: 5+1 For models with VW brakes
seat ibiza (08 ->) 2.0 TDi (141bhp) Engine size: 1968cc This is a Vented disc Diameter: 288mm Height: 34mm Bore: 65mm Studs: 5+1 For models with ATE brakes
seat ibiza (93-99)(6k) 1.0 Engine size: 998/1043cc This is a Solid disc Diameter: 239mm Height: 39mm Bore: 65mm Studs: 4+1
Years: 02/1993 > 01/1998
Part Number: KBD008G12
seat ibiza (93-99)(6k) 1.3 Engine size: 1272cc This is a Solid disc Diameter: 239mm Height: 39mm Bore: 65mm Studs: 4+1
Years: 02/1993 > 06/1996
seat ibiza (93-99)(6k) 1.4 (Solid Disc) Engine size: 1391cc This is a Solid disc Diameter: 239mm Height: 39mm Bore: 65mm Studs: 4+1
Years: 02/1993 > 10/1999
seat ibiza (93-99)(6k) 1.4 (Vented Disc) Engine size: 1391cc This is a Vented disc Diameter: 239mm Height: 39mm Bore: 65mm Studs: 4+1
Part Number: KBD852G12
seat ibiza (93-99)(6k) 1.6 16v Engine size: 1595cc This is a Solid disc Diameter: 239mm Height: 35mm Bore: 65mm Studs: 4+1
Years: 1996 > 1997
Part Number: KBD021G12
seat ibiza (93-99)(6k) 1.6 Engine size: 1598cc This is a Solid disc Diameter: 239mm Height: 35mm Bore: 65mm Studs: 4+1
seat ibiza (93-99)(6k) 1.8 (-> Ch No 6K-ZR003619) Engine size: 1781cc This is a Solid disc Diameter: 239mm Height: 35mm Bore: 65mm Studs: 4+1
seat ibiza (93-99)(6k) 1.8 (Ch No 6K-ZR003620 ->) Engine size: 1781cc This is a Vented disc Diameter: 239mm Height: 39mm Bore: 65mm Studs: 4+1
seat ibiza (93-99)(6k) 1.9 Diesel (-> Ch No 6K-ZR003610) Engine size: 1896cc This is a Solid disc Diameter: 239mm Height: 35mm Bore: 65mm Studs: 4+1
Years: 02/1993 > 01/1999
seat ibiza (93-99)(6k) 1.9 Diesel (Ch No 6K-ZR003611 ->) Engine size: 1896cc This is a Vented disc Diameter: 239mm Height: 39mm Bore: 65mm Studs: 4+1
seat ibiza (93-99)(6k) 1.9 TDi Engine size: 1896cc This is a Vented disc Diameter: 256mm Height: 38.mm Bore: 65mm Studs: 4+1
Years: 07/1996 > 10/1999
Part Number: KBD324G12
seat ibiza (93-99)(6k) 1.9 Turbo Diesel (-> Ch No 6K-ZR003513) Engine size: 1896cc This is a Solid disc Diameter: 239mm Height: 35mm Bore: 65mm Studs: 4+1
seat ibiza (93-99)(6k) 1.9 Turbo Diesel (Ch No 6K-ZR003514 ->) Engine size: 1896cc This is a Vented disc Diameter: 239mm Height: 39mm Bore: 65mm Studs: 4+1
seat ibiza (93-99)(6k) GTi 1.8 16v Engine size: 1781cc This is a Vented disc Diameter: 256mm Height: 38.mm Bore: 65mm Studs: 4+1
Years: 02/1993 > 12/1996
seat ibiza (93-99)(6k) GTi 2.0 (256mm Disc) Engine size: 1984cc This is a Vented disc Diameter: 256mm Height: 38.mm Bore: 65mm Studs: 4+1
seat ibiza (93-99)(6k) GTi 2.0 (280mm Disc) Engine size: 1984cc This is a Vented disc Diameter: 280mm Height: 39mm Bore: 64mm Studs: 4+1
Part Number: KBD404G12
seat ibiza (93-99)(6k) GTi 2.0 16v (256mm Disc) Engine size: 1984cc This is a Vented disc Diameter: 256mm Height: 38.mm Bore: 65mm Studs: 4+1
seat ibiza (93-99)(6k) GTi 2.0 16v (280mm Disc) Engine size: 1984cc This is a Vented disc Diameter: 280mm Height: 39mm Bore: 64mm Studs: 4+1
seat ibiza (99-02) 1.0 Engine size: 998cc This is a Vented disc Diameter: 239mm Height: 39mm Bore: 65mm Studs: 4+1
Years: 1999 > 2002
seat ibiza (99-02) 1.4 16v Engine size: 1391cc This is a Vented disc Diameter: 239mm Height: 39mm Bore: 65mm Studs: 4+1
seat ibiza (99-02) 1.4 Engine size: 1391cc This is a Vented disc Diameter: 239mm Height: 39mm Bore: 65mm Studs: 4+1
seat ibiza (99-02) 1.6 16v Engine size: 1595cc This is a Vented disc Diameter: 256mm Height: 38.mm Bore: 65mm Studs: 4+1
seat ibiza (99-02) 1.8 Turbo 20v Engine size: 1781cc This is a Vented disc Diameter: 280mm Height: 39mm Bore: 64mm Studs: 4+1
Years: 2000 > 2002
seat ibiza (99-02) 1.9 Diesel SDi Engine size: 1896cc This is a Vented disc Diameter: 239mm Height: 39mm Bore: 65mm Studs: 4+1
seat ibiza (99-02) 1.9 TDi (110hp) Engine size: 1896cc This is a Vented disc Diameter: 280mm Height: 39mm Bore: 64mm Studs: 4+1
seat ibiza (99-02) 1.9 TDi (90hp) Engine size: 1896cc This is a Vented disc Diameter: 256mm Height: 38.mm Bore: 65mm Studs: 4+1
seat ibiza (99-02) Cupra 1.8 Turbo 20v (280mm Disc) Engine size: 1781cc This is a Vented disc Diameter: 280mm Height: 39mm Bore: 64mm Studs: 4+1
seat ibiza All Models PR Code: 1ZE 1ZQ 1ZS 1ZR This is a Vented disc Diameter: 276mm Height: 46mm Bore: 65mm Studs: 5
Years: 2017 >
Part Number: KBD1975G12
seat ibiza All Models PR Code: 1ZG This is a Vented disc Diameter: 256mm Height: 45.mm Bore: 65mm Studs: 5
Part Number: KBD1974G12
Exhaust purchased and package arrived complete, undamaged... read more
©Copyright D C Performance Ltd 2024. All rights reserved D C Performance Ltd are regulated by the Finance Conduct Authority. CCL No.766344. D C Performance™ is the trademark of D C Performance Ltd.
Click here to see all the products for your ibiza
